To subscribe, advertise or contribute articles to smartmanufacturingtoday.com contact publisher@xtra.co.nz

  • Home
  • Newswire
  • Contact us
  • Advertise
  • Subscribe
  • About
Smart Manufacturing Today
Your source of info
  • Developments
  • Manufacturing Technology
  • Latest News
  • Featured
  • Computer Integrated Manufacturing
  • Robotics
  • Manufacturing Software
  • Internet of Things
  • Additive Manufacturing
  • Product Design
  • 3D Printing
  • Supply Chain
  • Workshop Tools
  • PLM & CAD/CAM
  • Covid-19
  • Events
  • Motors & Drives
  • The Circular Economy

News Ticker

New cloud-based solutions bring speed and feline agility to unlock the power of manufacturing data
Embracing equity for women in STEM
Operational technology security in smart manufacturing
Decarbonise while you Digitalise
Is low-code the future of manufacturing?
Network Monitoring – The competitive differentiator in manufacturing
Delivering supply chain resiliency across the fabricated metals industry with ERP
Detecting faults: A stitch in time for manufacturing?

Recycling can drive new manufacturing pathways and prosperity

 Of interest may be research by the UNSW Sustainable Materials Research and Technology (SMaRT) Centre which has found a way that could start a new ‘green aluminium’ manufacturing revolution and bolster government  and industry efforts to advance manufacturing, and be more sustainable and create new jobs.

The new technique to recover aluminium from complex, multilayered packaging is based on the microrecycling science pioneered by the SMaRT Centre under the leadership of its Director, Professor Veena Sahajwalla, and builds on their waste materials innovations including Green Steel and Microfactorie® technologies.

Green aluminiumProfessor Veena Sahajwalla UNSW

The research, published across two international scientific journals, demonstrates there is now a way to sustainably recycle polymer-laminated aluminium packaging (PLAP) materials, such as post-consumer food and coffee packaging, into high-quality aluminium and be a potential source of high-energy hydrocarbon products.’

“We developed Green Steel technology where we extract hydrogen and carbon from old rubber tyres and plastic as an innovative and green pathway in steel making , and we now can develop new ‘Green Aluminium’ with our novel technique called Thermal Disengagement Technology (TDT),” said Veena whose SMaRT Centre is part of the UNSW Science Faculty.

“Recycling using new technologies can be a foundation for the manufacturing of high-quality materials from our waste resources, as we seek to develop greater sovereign capability along with economic prosperity.”

Thermal Disengagement Technology

The new Thermal Disengagement Technology, described in scientific publications Springer Nature and the Journal of Cleaner Production, offers an innovative, efficient, and sustainable microrecycling technique to separate the materials in complex polymer-laminated metal packaging waste.

TDT can transform the aluminium into a clean and green metal, allowing it to be extracted in a way that means it can be used as a high-quality material for manufacturing, while minimising residual waste.

Veena said: “Green Steel and green manufacturing are capabilities we have been pioneering for over a decade. The jobs and sustainability revolution our government wants to create as announced in its 2020 Budget can get a boost from some of these sort of existing innovations where industry and researchers are already successfully partnering.

“Using waste-reforming technology can create new supply chains and jobs, especially in regional locations, because it doesn’t have to be large scale nor expensive. That is why I see a future where recycling and manufacturing are aligned, where waste and recycling become part of the manufacturing supply chain, and that is important in this new COVID era where we now highly value ‘sovereign capability’.

In one demonstration of how SMaRT is helping to create these new supply chains and aligning these sectors, it has connected an e-waste recycler directly with a steel maker enabling undervalued metals and plastics destined for overseas, landfill or incineration, can be used as feedstock.

Key research findings

Waste polymer laminated aluminium packaging (PLAP) material were analysed by Thermal Disengagement Technology (TDT) to explore the prospect of recycling the metal-polymer multilayer materials with minimum contamination and zero waste of metal (aluminium).

Laminated polymers on the metallic surface essentially demand some extra effort and energy to recycle the metal in its original form. In these studies, the effect of the laminated polymers of the aluminium surface to protect the surface contamination by means of oxidation was explored.

The rate of the transformation of the polymers in the air atmosphere is higher than the rate can be achieved in an inert atmosphere.

TDT to recycle the polymer laminated Aluminium packaging with and without an inert gas supply has been developed to produce specifically high-quality aluminium.

The oxidation of the aluminium surface in air media was higher and non-uniform compared to the inert media. At 550 degrees centigrade, the complete degradation of the polymers was observed within 20 min and the recovery of the aluminium was achieved without any metal loss with a very high purity.

The surface analysis of the laminated and non-laminated TD aluminium confirms that the rate of oxidation in oxygen-rich atmosphere for disengaged aluminium from PLAP is 80-90% lower and the polymers can act as the protection against the oxidation of the aluminium surfaces even after the complete degradation of the polymers by leaving the carbonaceous residues behind onto the surfaces.

The level of purity of recovered Aluminium is achieved ~96-99% with minor impurity/alloying elements of C, Si, Fe, etc. Oxidation of the recovered aluminium was controlled and detected less than 1% by our new and innovative TDT. The cleaner aluminium produced by this process has the desired scalability which is required for taking laboratory batch reactions towards industrial production.

The recycling of PLAP materials demands a process where whole materials can be processed and recycled with a minimum waste of energy and materials. TDT overcomes these constraints.

Several recycling techniques including traditional smelting have been practiced by the researchers and professionals.

But the major problems associated with the traditional smelting of PLAP materials are excessive material loss and lack of controlling aids during the smelting.

In many countries, waste polymer laminated metal packaging materials along with other municipal solid waste going to landfills or incineration and some of the materials are recycled in metallic forms from the bottom ash components by industrial separation.

The low value packaging materials containing polymers and aluminium found in the MSW draw no interest from recyclers.

Professor Veena Sahajwalla UNSW

Share this:

Related Posts

Cloud PIC 2

Developments /

New cloud-based solutions bring speed and feline agility to unlock the power of manufacturing data

Helen Blomqvist

Latest News /

Embracing equity for women in STEM

Alex Mosher

Developments /

Operational technology security in smart manufacturing

‹ Why 24/7 clean energy beats carbon offsetting› Machine learning speeds up search for new sustainable materials
NZ RS Online, 2021 New Year

Recent Posts

  • New cloud-based solutions bring speed and feline agility to unlock the power of manufacturing data
  • Embracing equity for women in STEM
  • Operational technology security in smart manufacturing
  • Decarbonise while you Digitalise
  • Is low-code the future of manufacturing?

Categories

  • 3D Printing
  • Additive Manufacturing
  • Computer Integrated Manufacturing
  • Covid-19
  • Developments
  • Events
  • Featured
  • Internet of Things
  • Latest News
  • Manufacturing Software
  • Manufacturing Technology
  • Motors & Drives
  • PLM & CAD/CAM
  • Product Design
  • Robotics
  • Supply Chain
  • The Circular Economy
  • Workshop Tools

Back to Top

  • Developments
  • Manufacturing Technology
  • Latest News
  • Featured
  • Computer Integrated Manufacturing
  • Robotics
  • Manufacturing Software
  • Internet of Things
  • Additive Manufacturing
  • Product Design
  • 3D Printing
  • Supply Chain
  • Workshop Tools
  • PLM & CAD/CAM
  • Covid-19
  • Events
  • Motors & Drives
  • The Circular Economy

To subscribe, advertise or contribute articles to smartmanufacturingtoday.com contact publisher@xtra.co.nz

(c) Smart Manufacturing Today, 2023